Ciao,
Chris
---------- Forwarded message ----------
Date: 9 AUG 1999 15:30:19.87
From: VAXGS::KATSAVOU@axpgs0.lngs.infn.it
To: KATSVNDS@axpgs0.lngs.infn.it, ZACCHEO@axpgs0.lngs.infn.it,
MARRELLIV@axpgs0.lngs.infn.it, CORTH@axpgs0.lngs.infn.it,
PECK@axpgs0.lngs.infn.it
Cc: ORSINI@axpgs0.lngs.infn.it, KATSAVOU@axpgs0.lngs.infn.it
Subject: TOHM power supply modifications
Ciao a tutti,
As most of you know, the TOHM (CAMAC) Kinetic Systems 1500/1502
power supplies need to be modified in order to be used (they draw
too much current from the +12V line).
Here is what this modification consists of:
- 1500: On the voltage regulator card, change R38 from 0.15 Ohm to
0.075 (2 0.15 Ohm in parallel)
- 1502: On the voltage regulator card, change R23 from 249 Ohm to
1.2 KOhm. Also, R44 from 100 Ohm to 470 Ohm.
A presto,
Ioannis & Massimo